Glass Etching, Sandblasting
Stone Carving, Signs,
and Tint Film

PT100FP Portable Pressure Pot Blaster 100-110 lb. Capacity with Foot Pedal

Quantity in Basket: none
Price: $695.00

• Remote Control System, Instant on-off
• Abrasive under pressure
• System shuts of media at tank-no sand build up in the blast hose
• Regulator w/Gauge, Foot Pedal, Diaphragm Media Valve
• Adjustable air and abrasive flow
• Large 12" Funnel Top, w/large 2 3/4" hole
• ASME Safety Rated Tank, Pressure Relief Valve
• 1 Type 2 Ceramic Nozzle, 2/32" Orifice, Goggles

• Flexible Blast Hose w/small Type 2 Nozzle End
• Grommet for thru-wall cabinet installation
• Blast Pressure: 2-5 psi
• Air Volume: 7-22 cfm
• Blast Hose: 8 ft., 3/8" I.D.
• Abrasive Capacity: 100-110 lbs.
• Tank Dimensions: 12" x 23"
• Overall Height: 33 1/2"
• Shipping Weight: 72 lbs. UPS
• Recommended Compressor spec: 10-15 cfm at 90 or 100 psi, 60-80 gallon air tank, oil cooled pump

• Airline Filter (water separator/trap) 1/2" NPT part #1081
• Type 2 Carbide Nozzles (long lasting), #1054=1/16", #1055=3/32", #1056=1/8"
• Type 2 Ceramic Nozzles, part #1065=3/32"
• Replacement Diaphragm for Media Valve, part #180
• Replacement 3/8" Flexible Blast Hose w/out ends, part #106
• Replacement type 2 Nozzle End Assembly Parts, part #265A